CEP408 Quad Channel 4 ohm energy-efficient amplifier – 4 X 80W
Note: Special Order Only
Quad Channel 4 ohm energy-efficient amplifier – 4 X 80W
The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes in two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.
The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.
The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.
Details
- Energy star certified
- Terminal block input connections
- Terminal block output connections
- Input linking through miniature switches
- Compact and lightweight design
- Class-D amplifier technology
Downloads
Specifications
| RMS/AES power handling | 4 x 80 W @ 70 V: 4 x 80 W @ 100 V: 4 x 80 W |
| Outputs – Connector | 4-pin Euro Terminal Block (Pitch – 5.08 mm) |
| Inputs – Connector | 3-pin Euro Terminal Block (Pitch – 3.81 mm) |
| Power Supply | 100 ~ 240V AC mains operation voltage |
| Signal / Noise | > 100 dB |
| THD+N (@ 1 kHz) | < 0.05% (1/8 rated Power) |
| Crosstalk (@ 1 kHz) | < 70 dB |
| Technology | Class D |
| Protection | DC Short circuit Overheating Over load Signal limiting |
| Cooling | Convection Cooled |
| Operating Temperature | 32° – 104° F (0° – 40° C) @ 95% Humidity |
| Frequency Response (± 3 dB) | 110 Hz – 20 kHz |
| Power | Supply: Switching mode Source: 100 ~ 240 V AC / 50 ~ 60 Hz |
| Power Consumption | Standby: 0.6 W Idle: 16.4 W Nominal (1/3 MUP): 196 W Nominal (1/8 MUP): 92 W |
| Inputs | Sensitivity (1W/1m): -0.5 dB ~ 10.5 dB Impedance: 10 kΩ balanced Connector: 3-pin Euro Terminal Block (Pitch – 3.81 mm) IEC C14 Connector Input linking through miniature switches |
| Outputs: Voltage / Impedance | 4 Ω 70 V / 62.5 Ω 100 V / 125 Ω |
Features
| Mounting | 19″ |
| Unit height | 1 RU (HE) |
| Colors | Black |
| Dimensions | 18.98″ x 1.73″ x 13.98″ (482 x 44 x 355 mm) (W x H x D) |
| Weight | 13.89 lbs (6.3 kg) |
| Construction | Steel |
Disclaimer/Notes/Software/Firmware
*Note: AUDAC operates a policy of continuous development. AUDAC reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up-to-date specifications and product details www.audac.eu For the most up-to-date Software and Firmware visit www.audac.eu.
Related Products
