DSC70 Connection cable with dual steel core, snap hook & open ends – 7 meters
Connection cable with dual steel core, snap hook & open ends – 7 meters
For use with the ALTI series speakers (not suited for ALTIxM series). This connection cable with two integrated steel cores is designed for suspension with an additional drop safety. Fixation is made through two snap-hooks on one end and a dual Gripple™ fixation on the other end.
Downloads
SLIDECAP Technology
Fast and easy installation
Mounting the speaker is done through a connection cable with two integrated steel cores for suspending with an additional drop safety. Fixation is made through two snap-hooks on one end and a dual Gripple™ fixation on the other end. A cable of 3.5 meters comes included with the ALTI series, other cable lengths and colors are also optionally available for purchase (DSC70 and DSC100).
An innovatively designed rear cover of the speaker can be placed after installation and hides the connection and suspension on the speaker end. The ceiling end connections are covered through a cable cover with the SlideCap™ latching system.
Position 1
Position the speaker cover around the cable and over the cabinet.
Position 2
Click and latch the speaker cover in place.
Position 3
Once assembled, the sliding tab can be inserted into the cover and can be slide into position.
Position 4
You are now presented with a nice and clean one unit outlook of the cabinet.
Disclaimer/Notes/Software/Firmware
*Note: AUDAC operates a policy of continuous development. AUDAC reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up to date specifications and product details www.audac.eu For the most up to date Software and Firmware visit www.audac.eu.