Spread the love

Solaro Processors — Collaboration & Conferencing DSP | Xilica

SOLARO

Right-sized for any room.

However you choose to deploy processing, Solaro provides a right-size for your room.

Locate processing in-room, or centralize in an IT datacenter to cost-optimize the implementation of multiple rooms. Solaro offers footprints that handle both with ease, incorporating the industry’s smallest-form-factor processor1 and a rack-mounted enterprise core. Mount under a table, behind a display, or in a drop-ceiling with the PoE-powered Solaro QR1. Or cater to high-channel-count and distributed applications with the Solaro FR1.

Built to outperform in the most demanding web-based collaboration environments, Solaro easily handles Microsoft Teams, Zoom and Google Hangouts with class-leading performance. Interoperability with select platforms allows for driverless USB volume and mute sync with peripherals in your system, such as ceiling microphones.

Always hear clearly.

Realistic, natural-sounding audio is delivered by class-leading HearClear™ acoustic echo cancellation. Utilizing knowledge from thousands of runtime hours, HearClear eliminates far-end echo with sophisticated algorithms to give collaborators a seamless and noise-free experience.

Keeping things under control.

Powerful integrated control engine functionality within every Solaro processor helps run a full AVC system with fewer components. Connect touchscreens and wall-pads to Solaro over Ethernet and eliminate costly third-party control systems, leveraging built-in Lua scripting cores and native modules for Technology Vendor Partners. And when you do want to use a third-party controller, Solaro connects to Crestron® and AMX® systems in a few clicks.

VIEW CONTROL SURFACES

Deliver a streamlined network experience.

Leverage standard network infrastructure to route audio and control across a facility with Solaro’s in-built Layer 3 Dante™ functionality, or benefit from Ethernet-to-Ethernet AV systems without proprietary cable and connectors. Safeguard bandwidth and ring fence security with an onboard dual NIC² to achieve physical separation of data and audio networks. And with both primary and secondary Dante networks, Solaro can deliver for mission-critical use cases where redundancy is key.

מעבד סאונד Xilica Solaro FR1 DSP - לבמה - הגברה תאורה כלי נגינה

Solaro FR1-D illustrated

Breakthrough performance with the Xilica X8™ chip.

Solaro Processors — Collaboration & Conferencing DSP | Xilica

Harnessing two decades of processor innovation, the Xilica X8 System-on-a-Chip (SoC) delivers astonishing power for enterprise-grade applications with a lightning-fast CPU, best-in-class MIPS/mW performance, and minimal power consumption. It also provides exceptional audio quality, with 40-bit floating point processing and class-leading 32-bit signal conversion, backed by sampling rates of up-to 96kHz. Hearing the difference is easy.

We’re now the official distributor of Xilica in Canada - DataVisual

Engineered to always adapt.

VIEW THE CARDS

Reimagined modularity sits firmly at the core of Solaro, with user-configurable I/O bays that eliminate the need for special tools or service visits. Solaro processors can be populated with any I/O card to deliver the feature-requirements match for your application, allowing systems to scale and product lifecycles to extend — lowering total cost of ownership. From traditional analog audio to USB, GPIO to relay control, it’s all possible.

SPECIFICATIONS  -> FR1,QR1

Solaro Specifications

FR1
  • THD+N (22Hz to 22kHz)

    0.002% (1kHz @ +4dBu)

  • EIN

    <125dBu, unweighted (20Hz to 20kHz)

  • Dynamic Range

    110dB, unweighted

  • Propagation Delay

    4ms

  • Crosstalk, input to input, 1kHz

    <110dB

  • Sampling Rate

    48kHz

  • A/D-D/A Converters

    32-bit

  • Acoustic Echo Cancellation

    Requires HearClear™ license; 250ms latency at eight channels, 100ms at 16 channels

  • BTU/Heat Load

    205 BTU/hr

  • Processor Type

    40-bit floating point

  • Phantom Power

    +48VDC (with XC-SML)

  • Power Supply

    90-240 VAC (50-60Hz) via internal power supply with IEC socket

  • Power Consumption

    <60W

  • Ambient Operating Temperature

    32-104°F (0–40°C)

  • Humidity

    0–98%, non-condensing

  • Altitude

    0-6,600 feet (0–2000 Meters) MSL

  • Network Connections

    Without XC-CTODN: 1x RJ45 (≥Cat 5e) for control.
    With XC-CTODN: 3x RJ45 (≥Cat 5e) including dual dedicated 1000Mbps Dante™ connections and separate Ethernet port for control

  • USB (with XC-SUB)

    Bit depth: 16-bit
    Number of channels: 2×2, send and receive
    Driver sample rate: 48kHz
    Card sample rate: follows DSP settings
    Connector: USB B, female

  • Dante™

    Requires XC-CTODN; 64×64 bi-directional (primary, secondary) with dual NIC; AES67

Mechanical

  • Card Slots

    16 user-configurable

  • Display(s)

    Single OLED display at front of device

  • Controls, Service & Indicators

    Up/Select/Down buttons. Recessed IP reset. Factory service micro-USB.

  • Weight

    11lbs; 5kg

  • Dimensions

    Height: 1.75″ / 44mm
    Width: 19″ / 483mm
    Depth: 12″ / 305mm

  • Mounting

    Standard 19″ rack; occupies 1U

General

  • Compliance

    CE, FCC Part 15B, Industry Canada ICES-003:7, Intertek ETL (US, CA), RoHS, REACH

  • Warranty

    Xilica Five Year Limited Warranty

  • Part Number(s)

    2200-001-0104 (FR1, without XC-CTODN);
    2200-001-0105 (FR1-D, with XC-CTODN)

QR1

DOWNLOAD DATASHEET
DOWNLOAD TECHNICAL DRAWING
  • THD+N (22Hz to 22kHz)

    0.002% (1kHz @ +4dBu)

  • EIN

    <125dBu, unweighted (20Hz to 20kHz)

  • Dynamic Range

    110dB, unweighted

  • Propagation Delay

    4ms

  • Crosstalk, input to input, 1kHz

    <110dB

  • Sampling Rate

    48kHz

  • A/D-D/A Converters

    32-bit

  • Acoustic Echo Cancellation

    Requires HearClear™ license; 250ms latency at eight channels, 100ms at 16 channels

  • BTU/Heat Load

    44 BTU/hr

  • Processor Type

    40-bit floating point

  • Phantom Power

    +48VDC (with XC-SML) up-to 75mA maximum

  • Power Supply

    IEEE 802.3af, Class 0 Power-over-Ethernet

  • Power Consumption

    13W maximum

  • Ambient Operating Temperature

    32-104°F (0–40°C)

  • Humidity

    0–98%, non-condensing

  • Altitude

    0-6,600 feet (0–2000 Meters) MSL

  • Network Connections

    2x RJ45 (≥Cat 5e) including dedicated 1000Mbps Dante™ connection and,
    separate Ethernet port for control and Power-over-Ethernet

  • USB (with XC-SUB)

    Bit depth: 16-bit
    Number of channels: 2×2, send and receive
    Driver sample rate: 48kHz
    Card sample rate: follows DSP settings
    Connector: USB B, female

  • Dante™

    4×4 bi-directional; AES67

Mechanical

  • Card Slots

    Eight (8) user-configurable

  • Controls, Service & Indicators

    Indicators: audio in, audio out, network, operate.
    Recessed IP reset. Factory service micro-USB.

  • Weight

    2.2lbs; 1kg

  • Dimensions

    Height: 1.65″ / 43mm
    Width: 4.25″ / 108mm
    Depth: 6″ / 152mm

  • Mounting

    Includes two (2) mounting brackets for installation onto flat surface.
    Compatible with standard 19″ 1U rack shelf.

General

  • Compliance

    CE, FCC Part 15B, Industry Canada ICES-003:7, RoHS, REACH

  • Warranty

    Xilica Five Year Limited Warranty

  • Part Number(s)

    2200-001-0204

ACCESSORIES FOR THIS PRODUCT
Solaro XC-SGP
Four Channel GPIO Card
Solaro XC-SUB
Two Channel USB I/O Card
Solaro XC-SLO
Two Channel Analog Audio Output Card
Solaro XC-SML
Two-Channel Analog Audio Input Card