SCP206 Compact dual-channel power amplifier - 2 x 60W @ 4 Ohm - 120W @ 70/100V

Spread the love

Table of Contents

MSRP:

SCP206

Uncommon strength, common sense

The SCP series are a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 5 different models to serve a wide range of applications with power ratings that vary between 120W up to 1000W in a half 19” rack space housing.

The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.

You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, this by passive cooling on the SCP206 and SCP212 and active cooling on the SCP224, SCP230 and SCP250 in order to improve thermal comfort without the need for additional actions.

A connection to the WP2xx series input wall panels (see page 76) or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.

Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making it unique in the market. This feature together with the overall energy efficient design makes the SCP meet the high standards of the Energy star certification.

When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.

Details

Compact and lightweight design
Compatible with WP2xx series remote wall input panels
Energy-saving standby mode
Stereo low impedance or 70/100V bridge mode
Unique optimal cooling

Downloads

System Specifications

RMS/AES power handling	@ 4 Ω Stereo		2 x 60 W
	@ 8 Ω Stereo		2 x 30 W
	@ 70/100 V Bridge		120 W
Frequency	Response (± 3 dB)		20 Hz – 20 kHz
THD+N (@ 1 kHz)			<0.05%
Signal / Noise			> 95 dB
Indicators			VU LED bar (front)
Outputs	Voltage / Impedance		70-100 V / 4 Ω
	Connector		4-pin Euro Terminal Block (Pitch – 5.08 mm)
Inputs	Connector		3-pin Euro Terminal Block (Pitch – 3.81 mm)
			IEC C14 Connector
	Other	Connector	RJ45
		Type	1 x Remote Volume controller
			1 x Remote Wall Mixer
			Stereo – BTL/HPF mode configuration
			Priority mute contact
Power			Standby switch
	Supply		100 ~ 240 V AC / 50 ~ 60 Hz
Control			Gain control potentiometers (rear)
			Stereo Low Z & Mono High Z switch
			70/100V switch
Cooling			Convection cooled
Technology			Class-D

Product Features

Construction		Steel
Dimensions		217.5 x 44 x 300 mm (W x H x D)
Mounting		1/2 19” / 1 HE or tabletop
Weight		2.70 kg
Accessories	Optional	19” Rackmount adapter
		WP2xx Universal wall pan

Plug-and-Play compatible

WP2xx series

These network input & output panels can be connected via an RJ45 connector on the back of the SCP. A cost-effective plug-and-play solution to extend or introduce brand-new input possibilities and control options.

Passive and Active Cooling

Optimal cooling

Could so much power in such a small enclosure cause some heating issues? The SCP series is designed uniquely so that optimal cooling is established, with passive cooling on the SCP206 and SCP212 and active cooling on the SCP224, SCP230, and SCP250.

Energy Star Certified

Same power, less energy

Optimal power consumption with ENERGY STAR® compliant standby-functionality, easily controllable with a switch on the back of the device. Enable or disable the ‘Auto standby mode’ whenever you like.

Disclaimer/Notes/Software/Firmware

*Note: AUDAC operates a policy of continuous development. AUDAC reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up-to-date specifications and product details www.audac.eu For the most up-to-date Software and Firmware visit www.audac.eu.