WP220 Universal wall panel – Bluetooth receiver input – 80 x 80 mm
Universal wall panel – Bluetooth receiver input – 80 x 80 mm
The WP220 is a remote universal wall panel with Bluetooth receiver input that can be used in combination with various AUDAC hardware (ARES5A, MTX series, AMP523, and more). It was never easier connecting your Bluetooth-enabled device with your audio installation using this wall plate. It will enable you to transfer high-quality audio over long distances between the wall panel and the loudspeaker, by just using inexpensive twisted-pair CAT5e or better cabling.
On the front side of the wall panel, you’ll find a Bluetooth pair button with a handy LED indicator to check if it’s in pairing mode or already connected to a device. Bluetooth pair name can be customized as desired. The Bluetooth receiver works with iPhones, iPads, iOS & Android smartphones, tablets, PC, Laptops, Desktops, etc…
The WP220 is available in 2 colours (White – RAL9003 & Black – RAL9005) and is compatible with most standard EU (80×80 mm) style in-wall boxes for solid and hollow walls. With the Elegant ABS front panel with glass, it will blend into any environment.
Details
Highlights
- Elegant design to blend in with any environment
- Compatible with EU (80×80 mm) installation materials
- Signal transmission over twisted pair (CAT5E) or better cabling
- Signal transmission insensitive for interference and noise
Applications
- Education
- Retail
- Bars & Restaurants
- Corporate
Downloads
- WP220 Spec Sheet
- WP220 Manual
- WP220 Bluetooth rename application
- WP220 Installer (APK) – Bluetooth rename application (.zip)
- WP220 Technical Drawing (PDF)
- WP220 Technical Drawing (DWG)
- WP220 3D-PDF
- WP220 3D-DWG
- Download All
Specifications
| Control | Bluetooth pairing button with LED | ||
| Output level +12 dBV enable / disable (DIP switch on rear) | |||
| Bluetooth enable/disable (DIP switch on rear) | |||
| Mono / Stereo (DIP switch on rear) | |||
| Inputs | Wall Panel | Type | Bluetooth receiver (Version 5.0) |
| Outputs | Level | +12 dB | |
| 0 dB | |||
| Connection | 8-pin terminal block (3.81 mm pitch) output connection | ||
Features
| Dimensions | 80 x 80 mm (3.14″ x 3.14″) (W x H) (Remote wall panel) | ||
| Colours | Black (RAL9005) (WP220/B) | ||
| White (RAL9003) (WP220/W) | |||
| Front finish | Elegant ABS front panel with glass | ||
| Accessories | Optional | Surface mount Installation boxes | WB200 – Surface mount wall box for WP & DWP series |
| Flush mount Installation boxes | Flush-mount box for 45 x 45 mm wall panel – Solid wall – WB45S/FS | ||
| Flush-mount box for 45 x 45 mm wall panel – Hollow wall – WB45S/FG | |||
Bluetooth Custom ID Naming
RENAME YOUR WP22X SERIES WALL PANELS
In large operations, several WP2xx wall panels might be required. It may be difficult to keep a clear overview when all these wall panels are equipped with Bluetooth. Therefore it is possible to change the Bluetooth ID of a WP2xx to differentiate each wall panel. The Bluetooth ID can be changed in the ‘AUDAC Bluetooth rename ID’ app.
Please note: The application is currently only available for Android devices.
See the downloads tab for details.
Disclaimer/Notes/Software/Firmware
*Note: AUDAC operates a policy of continuous development. AUDAC reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up-to-date specifications and product details www.audac.eu For the most up-to-date Software and Firmware visit www.audac.eu.
Related Products
