The V1406 series are affordable die-cast aluminium housings for both indoor and outdoor installation. The V1406 series housings accommodate CCD cameras with fixed or vari-focal lens. A rear lock-in latch secures the top cover for added security. When the top cover is completely open, a unique pneumatic strut will support it. There are two adjustable cable clamps on the bottom for easy installation of power supply and video cable. V1406 series have an optional set of accessories which can be installed at the factory, including fan, heater, sunshield and rain wiper. The input voltage is available in 24 VAC. The V1406 series can be installed on either fixed mounts or pan/tilts.
- Indoor/outdoor installations with fixed mount or pan/tilt
- Die-cast aluminium
- Front opening top cover with pneumatic strut
- Two cable entry ports on the housing bottom
- Rear lock-in latch connection
- IP66 standard
- Easy installation and maintenance
- Optional fan, heater, sunshield and rain wiper
Camera Housing, Indoor/outdoor, 11-inch internal, pneumatic supporting lid, w/ sun shield, heater & blower, 24VAC
Wall Mount, H/V adjustable for housing, 33.07 lbs (25 kg) load
Heater: 50 W;
Window Wiper: 5 W
It can be conversely installed if elevation of the camera is needed.
(320 mm×125 mm×94 mm)
(635 mm×216 mm×178 mm)
Turns on at 41°F ± 9°F (5°C ± 5°C);
Turns off at 68°F ± 9°F (20°C ± 5°C)
Blower:
Turns on at 95°F ± 9°F (35°C ± 5°C);
Turns off at 68°F ± 9°F (20°C ± 5°C)
-4°F ~140°F (-20°C ~ 60°C) (w/ heater)